Variation of ZnS deposition time on chemically prepared Cd1-xZnxS ternary compound from CdS/ZnS bilayers
No Thumbnail Available
Date
2023
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier
Abstract
Chemical bath deposition (CBD) was successfully used for the preparation of cadmium zinc sulphide (Cd1-xZnxS) ternary alloy thin film with × composition, in the range of 0 and 1, from post annealing treatment of bilayer cadmium sulphide (CdS)/zinc sulphide (ZnS) thin film. Increasing the ZnS layer deposition time leads to an increase in the overall thickness of the bilayer with an attendant increase in zinc ion concentration. From the XRD measurement, thin film samples presented hexagonal structure, with a shift in the peaks position to higher angles coupled with a decreasing crystalline size and lattice constants as zinc ion is continuously incorporated into the Cd1− xZnxS thin films. The continuous addition of the wider band gap energy ZnS into the ternary compound as the ZnS deposition time increases constantly brought about the widening of the band gap energy. Energy dispersive spectroscopy (EDS) measurement established the presence of the major elements Cd, Zn and S. The room temperature electrical resistivity determined from the point probe measurement ranges between 2.1 ×10-3 and 1.2 × 101 Ωm, and showed a decrease with increasing zinc ion contents. In this study, it was established that Cd1-xZnxS ternary compounds can be prepared starting with CdS/ZnS bilayer, and its post thermal annealing, with the band gap energy able to be accurately controlled by modifying the CdS/ZnS thickness ratio through variation of ZnS deposition time. The results from CdZnS thin film compounds prepared under this present condition established its superior effectiveness as a buffer layer in thin film solar cells.
Description
Keywords
Cadmium zinc sulphide Thin films Chemical bath deposition Optical properties SEM Annealing