Browsing by Author "Odewole, M.M"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Determination of physical properties of Almond seed related to the design of food processing machines(Nigerian Journal of Pure and Applied Science, 2016) Sunmonu, M.O; Iyanda, M.O.,; Odewole, M.M; Ajala, E.O; Moshood, A.N.; Aduba, J.J.In this study, some selected physical properties of two varieties of Almond seed (Red and White) grown in Nigeria were determined. The physical properties of Red Almond were Major Diameter (49.35±4.16mm), Intermediate Diameter (33.05±2.79mm), Minor Diameter (23.37±2.31mm), Weight (10.20±2.24g), Geometric mean diameter (33.59±2.41mm), Arithmetic mean Diameter (35.26±2.45mm), Surface Area (3564.6±524.1mm2), Sphericity (68.3±4.36%), Volume (0.5023±0.07cm3), Density (19.53±3.82g/cm3) while values of coefficient of static friction of 0.45±0.04, 0.40±0.06 and 0.52±0.06 were recorded for glass, metal and wood surface respectively in red almond. Also values of angle of internal friction of 24.12 ± 1.92, 21.93±3.00 and 27.50± 2.64 were recorded for glass, metal and wood surfaces in red almond. The properties of white Almond were: Major diameter (61.26±4.15mm), Intermediate diameter (29.61±3.05mm), Minor diameter (21.52±1.59mm), Weight (10.9±1.52g), Geometric mean diameter (33.86±2.09mm), Arithmetic mean diameter (37.47±2.13mm), Surface area (3616.10±453.7mm2), Sphericity (55.39±3.46%), Volume (0.51±0.06cm3), Density (22.33±3.48g/cm3) while values of coefficient of static friction of 0.41±0.06, 0.41±0.07 and 0.51±0.05 were recorded for glass, metal and wood surface respectively in white almond. Also values of angle of internal friction of 22.20± 2.76, 22.38 ±3.45 and 26.96± 2.23 were recorded for glass, metal and wood surfaces in white almond. Statistical test (independent t test) on the properties showed there were significant difference at 5% level between Red Almond and White Almond.These properties are also needed for analytical prediction of the drying behaviour of agricultural materials. These properties are also use to determine heat transfer in agricultural materials.Item Effect of fermentation time and mix ratio on some nutritional qualitiesof the dry mixture of maize and sorghum powder (Ogi).(Croatian Journal Food Science and Technology, 2017) Odewole, M.M; Sunmonu, M.O.; Opaleke, D.O.; Adeyinka-Ajiboye, O.; Sani, R.O.A.; Aiyejoritan, M.T.The effect of two process conditions (fermentation time (B) and mix ratio (A)) on the dry mixture of maize (M) and sorghum (S) powder (ogi) was investigated. Five mix ratios (1 (M50:S50), 2 (M60:S40), 3 (M70:S30), 4 (M80:S20), 5 (M90:S10)), and five fermentation times (6, 12, 18, 24 and 30 h) were considered. The drying was done at 50 °C in a convective fabricated cabinet dryer. It took about 2 hours for the drying to be completed. After drying, all samples were analysed for the output parameters (carbohydrate, crude fibre crude protein, fat content, vitamin C and magnesium content). The results showed that the interaction of all the levels of the two process conditions did not change the mean values of the carbohydrate, crude protein and magnesium contents of the dried fermented product (ogi powder). Various combinations of all the levels of the two process conditions did not cause the value of the carbohydrate, crude fibre, crude protein, fat, vitamin C and magnesium content to be higher than 83.5%, 0.6%, 3.2%, 1.2%, 3.0%, and 3.85 mg/100g respectively.Item Optimization of the Performance of a Vertical Screw Jack for Groundnut Oil Extraction(Centrepoint Journal (Science Edition), 2018) Odewole, M.M; Sunmonu, M.O.; Ajala, E.O.Groundnut (Arachis hypogaea) is one of the oil seeds in the category of the second most valuable commodity in the world trade. One of the methods of extracting groundnut oil is with the use of mechanical device which offsets some of the problems of traditional and chemical methods of extraction. Most local processors of groundnut oil do not use to or do not know how to put into consideration processing factors/inputs (temperature, heating time, pressure, moisture content and so on) that can lead to better (optimum) oil extraction outputs. This situation is causing low oil yield and low extraction efficiency, high extraction loss and poor quality of oil even when machines are used for extraction. Therefore, this study used a vertical screw jack to extract groundnut oil and also optimize the oil extraction process with the use of Design Expert (8.0.3 version) computer software package. Three levels of temperature (50, 60 and 70oC) and two levels of heating time (5 and 10 min) were used to pretreat seeds in the extraction chamber of the vertical screw jack prior to oil extraction process. The extraction process were estimated for oil yield, extraction efficiency and extraction loss; and oil quality in terms of Free Fatty Acid (FFA), saponification value, acid value, refractive index and viscosity were analyzed. Results showed that, optimum oil yield (29.90%), extraction efficiency (48.12%) and extraction loss (4.23%) were achieved at temperatures and time of heating of 50, 50.21 and 70oC; and 10, 5.02 and 10 min respectively. Temperature of 50oC and time of heating of 10, $5.00 + 0.00 CPJ, 10, 10, 5 and 5 min gave optimum values of 3.38 mgKOH/g, 190.26 mgKOH/g, 6.74 mgKOH/g, 1.45 and 1.47 cm/s for FFA, saponification value, acid value, refractive index and viscosity respectively; whereas, optimum value of 5.06 was obtained for pH at temperature of 50.15oC and 9.98 min time of heating.