Browsing by Author "AJAO, KABIRU SULEIMAN"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Assessment of physico-mechanical properties of clay deposits in Asa Local Government Area of Kwara State Nigeria for industrial applications(Department of Civil Engineering, Faculty of Engineering and Technology, University of Ilorin, 2019-04-20) AJAO, KABIRU SULEIMAN; Shuaib-Babata, Y.L; Ambali, I.O; Elakhame, Z.U; Aremu, I.N; Ibrahim, H.K; Odeniyi, O.Mabout the properties of most available clay materials in Nigeria is necessary to enhance their industrial applications. Availability of this information will adversely reduce importation of refractory materials and its products into the country, since the mineral resources are abundantly available in the country. This study evaluated the chemical and physico-mechanical properties of some selected clay deposits across the three districts of Asa Local Government Area (LGA) of Kwara State to ascertain their suitability for refractory and other industrial applications. The results revealed that the clay samples were mainly alumina-silica based with silica and alumina concentrations of 47.30 – 58.50% and 32.75 – 34.30% respectively. The physico-mechanical properties exhibited by the clay samples included: clay content (33.80-72.20%), linear shrinkage (6.10-9.80%), moisture content (21.00-33.00%), bulk density (1.99 - 2.87 g/cm3), apparent porosity (21.00-37.00%), permeability (73-94), compressive strength (213-840 N/mm2), thermal shock resistance (+29 cycles), specific gravity (2.18-2.52) and refractoriness (>1300oC). The properties were within the required standard values which make the clays suitable for insulating materials, refractories for low-medium thermal applications andItem Characterization of Belle natural moulding sand for foundry applications(Department of Civil Engineering, Faculty of Engineering and Technology, University of Ilorin, 2019-03-12) AJAO, KABIRU SULEIMAN; Shuaib-Babata, Y.L; Nafiu, M.B; Ambali, I.O; Elakhame, Z.U; Busari, Y.O; Aremu, I.NThere exists vast availability of natural sands which may be suitable for foundry applications in different locations Kwara State in particular and generally in Nigeria. The sands need to be identified and characterised for productive and profitable foundry practices. In this study, assessment of chemical and physico-mechanical properties of the natural moulding sand in Belle community of Kwara State, Nigeria was carried out to ascertain its suitability for foundry applications. The analysis of the sand samples’ Chemical compositions were done using an XRF Analyser, while American foundry-men Society, ASTM and British standards laboratory tests procedures were adopted appropriately to determine the sand’s physico-mechanical properties. The results of chemical composition analysis showed that SiO2 have dominance proportion in the sand sample with an average value of 92.90 %, followed by Al2O3 (5.13%). CaO, Fe2O3, MgO, K2O, Na2O, ZnO and MnO were present within acceptable limits as trace elements. The results showed average physico-mechanical properties of the natural moulding sand sample to include grain fineness number (126), bulk density (1765 Kg/m3), moisture contents (7.66%), specific gravity (2.64), permeability (0.1cm/s), green compressive strength (51KN/m2), dry compressive strength (209KN/m2), flowability (65.22%), clay content (10%) shatter index (76%) and refractoriness (>900oC), which were within the required standards for casting of non-ferrous metal. Thus, Belle sand was found suitable for casting of non-ferrous metals. Though, there may be a need for the use of additives like bentonite, to enhance the sand’s clay content in order to increase the sand potential for foundry applications