Jabire, Adamu HaliluSalisu, SaniSaminu, SaniAdamu, Mohammed JajereHussein, Mousa I.2023-08-282023-08-282022-12-292405-8440https://uilspace.unilorin.edu.ng/handle/20.500.12484/11691This paper presents a compact, crossed-polarized, ultra-wideband (UWB) four-ports multiple- input-multiple-output (MIMO) printed antenna. The proposed antenna is constructed from four microstrip circular patch elements fed by a 50-Ω microstrip line. Two metamaterial cell elements, in the form of a rectangular concentric double split ring resonator (SRR), are placed at the upper plane of the substrates for bandwidth improvement and isolation enhancement. The ultra- wideband frequency response is achieved using a defective ground plane. Surface current flow between the antenna’s four elements is limited to ensure maximum isolation. The four-port MIMO system is designed with orthogonal antenna elements orientation on an FR4 substrate with a loss tangent of 0.02 and an overall size of 30 mm ×30 mm ×1.6 mm. Such orientation resulted in less than 􀀀17dB port-to-port isolation and an impedance bandwidth of 148% (3.1–12 GHz). The proposed UWB-MIMO antenna achieved a maximum realized gain of 6.2dBi with an efficiency of 87%. The measured and simulated results are in good agreement over the operating frequency band (3.1–12 GHz). The results also provide overall good diversity performance with the TARC <􀀀10 dB, ECC <0.001, DG >9.9, MEG <􀀀3 dB and CCL <0.1. The proposed antenna is well- suited for applications in WLAN, WIMAX and GPRs.enUWB-MIMO Metamaterials Mutual coupling Cross-polarized elements Correlation coefficientArticle