Adegun, I.KAdepoju, S.A.Aweda, J.A.2023-06-272023-06-272012ISSN 1686-9141https://uilspace.unilorin.edu.ng/handle/20.500.12484/11369The rice milling plant is developed to solve the problem associated with the manual processing of locally produced rice (OFADA RICE), particularly the removal of pebbles and other impurities from the rice. The machine consists majorly of two stages: dehulling and sieving. The dehuller consists of rotary cylindrical sieve which separates the chaff from the rice grains via the shaft and blade. Impact method was adopted for the removal of husk from the rice paddy. After milling the paddy rice, it passes through a vibrating sieve machine where a crank mechanism converts rotary motion into a reciprocating movement of the sieve bed. The vibrating sieve removes the chaffs and the pebbles from the rice grains. The performance tests conducted on the machine showed that the dehuller effectiveness reduced with increase in number of paddy rice fed into it, while the sieve shaker optimum yield occurs at a maximum stroke of 40. It was discovered that a minimum output shaft speed of 900 rpm transmitted by a v-belt drove by an electric motor of 3.5 hp which is required for the effective performance of the vibrating sieve. Mild steel was used majorly for the fabrication of component parts for ease of machining, assembling, maintenance and affordability. The plant would reduce the hazardous health implication currently experienced when eating locally produced rice. It would reduce the cost of labour and also enhance the economic status of the peasant farmers in Nigeria.endehuller, impact method, oryza sativa, paddy, pebbles, sievingArticle